Str. Dimitrie Filipescu nr. 7, Birou 1, Buzău
Control Soft & Automation
Buzău · Romania

European industrial projects

Industrial automation engineered for European manufacturing

Control Soft & Automation supports industrial automation, electrical engineering, digitalization and machinery-safety work from Romania for projects across Europe.

See documented installations from our Romanian project portfolio below.

Operating Siemens S7-1200 and SIWAREX weighing modules in an industrial control cabinet
Documented installation in Romania · PLC and weighing control

Work you can inspect

Three projects from our operating portfolio

These installations are in Romania. They show the engineering and equipment behind our work; they do not imply that we have already delivered projects in every country listed below. The photographs come from the project portfolio.

Siemens S7-1200 and two SIWAREX weighing modules in an operating control panel
Industrial weighing · PLC cabinet

Two independent in-line weighing units

Requirement
Automated weighing in a continuous production process, with two independently operated scales.
Delivered
Siemens S7-1200, two SIWAREX WP251 modules and an HMI for operation and monitoring.
Result shown
The two weighing paths are integrated into one PLC/HMI control system.
Siemens S7-1500 control panel from a boiler flue-gas heat recovery installation
Energy recovery · automation panel

Heat recovery from steam-boiler flue gases

Requirement
Recover heat from three steam boilers while maintaining plant operations.
Delivered
PLC, HMI and SCADA integration with Siemens S7-1500, WinCC and PROFINET.
Result shown
Recovered heat is routed to boiler feedwater, air preheating and auxiliary uses.
Actual Siemens HMI screen from a recycling process line
Recycling · process HMI

Modernization of a recycling process line

Starting point
Obsolete hardware and limited documentation across conveying, drying and colour separation.
Delivered
Reverse engineering, renewed electrical infrastructure, a control room and MCC integration.
Result shown
The process stages are operated and monitored through the modernized control system.

For more installation photographs and technical details, view the project portfolio. Have a similar application? Send a technical enquiry.

A practical delivery model

Start with the process, interfaces and project boundary

A European project does not begin with a generic promise of remote delivery. It begins with the machine, the production process, available documentation and the responsibilities between production, engineering, IT/OT and the local installation team.

We can prepare the technical scope, electrical and automation architecture, software, documentation and commissioning plan together with the customer. Site work, travel, language, safety rules and local responsibilities are agreed before the project starts.

PLC · HMI · SCADAAutomation and process visibility
Electrical engineeringEPLAN, panels and field integration
Industry 4.0Energy, condition, OT and enterprise data

European project enquiries

One engineering base, a defined scope for each plant

We work from Romania and assess enquiries in English. The examples above are Romanian installations; the countries below are markets where we welcome project discussions, not claims of local offices or completed projects.

Germany

Siemens PLC, WinCC, electrical engineering and machinery-safety enquiries. German technical pages are available; project meetings and the language of deliverables are confirmed before quotation.

United Kingdom

Discuss brownfield automation and SCADA modernization in English. Plant access, site rules, installation responsibilities and FAT/SAT evidence belong in the agreed scope.

Benelux

For the Netherlands, Belgium and Luxembourg, define the control, OT-data or monitoring interface first. Local installation and any Dutch or French documentation must be agreed separately.

Norway, Sweden and Denmark

Software and architecture can be prepared remotely after technical discovery. Travel, local installation and the commissioning window are planned with the plant; we do not imply a local service team.

France

Start with an English technical brief for automation or machinery-safety work. French-language HMI screens, manuals and site coordination are included only when specified in the offer.

Spain

Energy monitoring, industrial utilities and automation can be assessed from process diagrams and available data. Spanish documentation and on-site work require an explicit scope.

Poland and Czechia

For PLC/SCADA retrofit or production-line modernization, first document the installed equipment, interfaces and shutdown constraints. The local contractor's role and acceptance tests are defined before execution.

Technical substance

Engineering decisions start at the installed equipment

The projects above show three different plant problems. We document signals, existing controls and process constraints before selecting or changing the automation layer.

PLC and weighing logic

The in-line weighing project uses Siemens S7-1200 and a separate SIWAREX WP251 module for each scale. A TIA Portal scope starts with I/O, operating modes, interlocks and the agreed calibration procedure.

HMI, WinCC and plant data

The three-boiler heat-recovery project uses S7-1500, WinCC and PROFINET. Define screens, alarms, trends and the data needed by operators before specifying SCADA changes or an archive.

Electrical and field interfaces

EPLAN drawings, cabinet circuits, MCC links and field wiring are defined against the installation. PROFINET, OPC UA or Modbus integration depends on the actual devices, licenses and available access.

Modernization of undocumented lines

The recycling-line project began with obsolete hardware and limited drawings. Survey the existing I/O and circuits, preserve usable functions, then define migration and the production shutdown window.

Machinery safety engineering

Safety Studio supports risk assessment, safety-function design and SISTEMA documentation. PL/SIL targets, validation work and conformity responsibilities are defined for the specific machine.

Industrial software and data

ENERGRAFICS addresses energy data, CSA VibraThink machine condition, CSA Guard OT security and CSA Platform shared integration. SAP data flows are designed only around approved project interfaces.

Detailed engineering scopes

Five entry points for European projects

Capabilities, technologies and applications are defined before commercial and site commitments are agreed.

From first survey to acceptance

Four project steps with a defined output

The sequence and deliverables are adapted to the machine and written into the offer before work begins.

  1. Survey the plant

    Collect available electrical drawings, PLC/HMI backups, equipment and I/O lists, network information and shutdown constraints. Record what is missing.

  2. Agree the design

    Define control functions, data interfaces, safety boundaries, operator screens and the acceptance criteria. Identify EPLAN updates and software licenses in the scope.

  3. Build and check

    Prepare PLC/HMI/SCADA changes and the contracted electrical work. Plan workshop checks or FAT against the agreed functions and documents.

  4. Commission and hand over

    Coordinate the installation team and production window, perform the agreed site checks or SAT, then hand over the specified software and as-built documents.

Cross-border delivery

Who does what is agreed before the project starts

Remote engineering does not replace plant access, local installation or acceptance on the real machine. We put these boundaries in the technical offer.

Control Soft & Automation

Technical assessment, automation and electrical design, software preparation and documentation for the contracted scope. FAT, travel, on-site commissioning and support are included only when agreed.

Plant and local team

The customer confirms process data, site access, shutdown windows and site rules. Installation work and locally required roles are assigned explicitly to the customer, its contractor or Control Soft in the offer.

Joint acceptance

Agree tests, FAT/SAT responsibilities, handover criteria, documentation language, travel costs and support arrangements before execution. English is the default technical discussion language; German or translated deliverables are project-specific.

Before requesting a quotation

Questions about European plant projects

Answers depend on the installed equipment and the agreed technical scope.

Can you assess a machine without its PLC source code or complete drawings?

Yes, but the first scope is a technical survey and, where needed, reverse engineering. We cannot promise a migration plan or fixed quotation before the installed I/O, circuits and access constraints are understood.

Which work can be prepared remotely, and what requires plant access?

Architecture, PLC/HMI/SCADA changes and documentation may be prepared remotely when the required information and access are available. Installation, machine checks and commissioning are planned with the plant and local team in the agreed scope.

Do you provide commissioning outside Romania?

A cross-border commissioning visit can be assessed for an agreed project. Travel, site safety, local installation responsibilities, FAT/SAT and support are specified in the offer; we do not claim local offices in the target countries.

What information is needed to estimate a retrofit?

Please share the plant location, machine and process description, existing PLC/HMI backups and drawings if available, I/O and network details, software licenses, safety requirements and the possible shutdown window. Missing information may require an initial survey.

In which language will the engineering documents be delivered?

English is the default language for an initial technical discussion. German, French, Spanish or other translated screens, manuals and handover documents are included only when the project offer explicitly specifies them.

Discuss the technical scope

Tell us where the project is and what must work.

Share the plant location, industry, problem and target timing. We review the technical scope before discussing a quotation. For an urgent production issue, call rather than waiting for the form.

The time needed for a technical proposal depends on the available documentation and the project scope.

Anti-spam verificationSolve the calculation to confirm you are a person.